Estimation of Wheat/Rice Residue Burning Areas in Major Districts of Haryana,India, Using Remote Sensing Data     

Manoj Yadav  M. P. Sharma  R. Prawasi  Rajeev Khichi  Pavan Kumar  V. P. Mandal  Abdul Salim  R. S. Hooda 《Journal of the Indian Society of Remote Sensing》2014,42(2):343-352

Haryana has emerged as an important state for Rice & Wheat production in India contributing significantly in the central pool. Mechanized combine harvesting technologies, which have become common in Rice Wheat System (RWS) in India, leave behind large quantities of straw in the field for open burning of residue. Besides causing pollution, the burning kills the useful micro flora of the soil causing soil degradation. There is no field survey (Girdawari) data available with the Government for the areas where stubble burning is taking place. The present paper describes the methodology and results of wheat and rice residue burning areas for three districts of Haryana namely Kaithal, Kurukshetra and Karnal for the year 2010 using complete enumeration approach of multi-date IRS-P6 AWiFS and LISS-III data. In season ground truth was collected using hand held GPS and used to identify area of burnt wheat/rice residues, associated crops and land features. After geo-referencing the satellite images, district images were masked-out and multi-date image data stacks were created. Normalized Difference Vegetation Index (NDVI) of each date was generated and used at the time of classification along with other spectral bands. The non-agricultural classes in the image included: forest, wasteland, water bodies, urban/settlement and permanent vegetation etc. The vector of these non-agriculture classes were extracted from the land use, imported and mask was generated. During the classification non-agriculture area was excluded by using mask of these classes. From this the agricultural area could be separated out. The area was estimated by computing pixels under the classified image mask. In season multi-date AWiFS data along with available single-date LISS-III data between third week of April to last week of May are found to be useful for estimation of wheat residue burning areas estimation. The data between second week of October to last week of November is useful for estimation of rice residue burning areas estimation at district level.  相似文献   

Developing Basic Design and Mathematical Framework for a Mobile Mapping System—a Case Study Using Available Sensors     

Manohar Yadav  Salil Goel  A. K. Singh  Bharat Lohani 《Journal of the Indian Society of Remote Sensing》2014,42(2):301-310

There is a growing demand for technologies that support capturing of comprehensive and good quality 3D spatial data at a faster rate with low investment and minimal effort, while also causing least disturbance to other activities in the area. Mobile mapping systems (MMS), which are being developed in a few western countries, solve this problem but their import is highly expensive. While the components of a MMS are easily available off-the-shelf at lower cost, the main reason for their high cost is the intellectual property involved in the sensor design, integration, calibration, and the related software. Developing the intellectual property locally can bring down the cost of MMS to a large extent. Keeping this in mind, a MMS has been developed in this research using the locally available sensors. This paper describes the methodology to integrate navigation and mapping sensors including the developed calibration procedures. It further describes the time synchronization technique developed for multi-sensor data fusion and algorithms implemented by software package for data processing. The sensors integrated in the MMS include a standard GPS, IMU and a standard laser scanner. A Kalman filter is implemented to integrate the GPS and IMU data, which provides position and orientation information for the sensors. A simulation software package is also developed to verify, understand and develop the equations used in MMS. Field tests have been performed using the developed MMS and the results are shown for a few cases. Results validate the designed algorithms and indicate the successful development of the MMS, which has potential to be further developed and used in field. Though a number of papers are available on MMS, the thrust of this paper is to present a complete methodology for developing a MMS using locally available sensors. Unlike available papers, this paper outlines all aspects of design, calibration and operation, where each of these aspects is handled in a novel way as demanded by the available sensors. This is particularly useful for individuals or organizations interested in procuring sensor components off-the-shelf and develop their own (low cost) Mobile Mapping system.  相似文献   

Resonance in a geo-centric satellite due to earth’s equatorial ellipticity     

Sushil Yadav  Rajiv Aggarwal 《Astrophysics and Space Science》2013,347(2):249-259

The resonances in a geocentric satellite due to earth’s equatorial ellipticity have been investigated. The resonance at five points resulting from the commensurability between the mean motion of the satellite and the earth’s equatorial ellipticity is analyzed. The amplitude and the time period of the oscillation have been determined by using the procedure of Brown and Shook. A comparison of their effects on the orbital elements has also been studied. It is observed that the amplitude and the time period of the oscillation decrease as Γ (angle measured from the minor axis of the earth’s equatorial ellipse to the projection of the satellite on the plane of the equator) increases in the first quadrant for all the resonance cases.  相似文献   

Estimation of seismic hazard in Gujarat region, India   总被引：1，自引：1，他引：0  

Sumer Chopra  Dinesh Kumar  B. K. Rastogi  Pallabee Choudhury  R. B. S. Yadav 《Natural Hazards》2013,65(2):1157-1178

The seismic hazard in the Gujarat region has been evaluated. The scenario hazard maps showing the spatial distribution of various parameters like peak ground acceleration, characteristics site frequency and spectral acceleration for different periods have been presented. These parameters have been extracted from the simulated earthquake strong ground motions. The expected damage to buildings from future large earthquakes in Gujarat region has been estimated. It has been observed that the seismic hazard of Kachchh region is more in comparison with Saurashtra and mainland. All the cities of Kachchh can expect peak acceleration in excess of 500?cm/s² at surface in case of future large earthquakes from major faults in Kachchh region. The cities of Saurashtra can expect accelerations of less than 200?cm/s² at surface. The mainland Gujarat is having the lowest seismic hazard as compared with other two regions of Gujarat. The expected accelerations are less than 50?cm/s² at most of the places. The single- and double-story buildings in Kachchh region are at highest risk as they can expect large accelerations corresponding to natural periods of such small structures. Such structures are relatively safe in mainland region. The buildings of 3?C4 stories and tall structures that exist mostly in cities of Saurashtra and mainland can expect accelerations in excess of 100?cm/s² during a large earthquake in Kachchh region. It has been found that a total of 0.11 million buildings in Rajkot taluka of Saurashtra are vulnerable to total damage. In Kachchh region, 0.37 million buildings are vulnerable. Most vulnerable talukas are Bhuj, Anjar, Rapar, Bhachau, and Mandvi in Kachchh district and Rajkot, Junagadh, Jamnagar, Surendernagar and Porbandar in Saurashtra. In mainland region, buildings in Bharuch taluka are more vulnerable due to proximity to active Narmada-Son geo-fracture. The scenario hazard maps presented in this study for moderate as well as large earthquakes in the region may be used to augment the information available in the probabilistic seismic hazard maps of the region.  相似文献   

Estimation of site amplification functions in Gujarat region, India     

Sumer Chopra  Dinesh Kumar  B. K. Rastogi  Pallabee Choudhury  R. B. S. Yadav 《Natural Hazards》2013,65(2):1135-1155

Site response in the Gujarat region is studied using local earthquake data recorded at 32 sites spread all over Gujarat region, India. Out of these 32 sites, 15 sites are located in Kachchh region, 8 in Saurashtra and 9 in mainland Gujarat region. These sites are underlain by different types of rocks/sediments of different ages. Out of 32 stations, 7 stations are on Quaternary deposits, 6 on Tertiary, 11 on Deccan, 3 on Jurassic, 3 on Cretaceous and 2 on Proterozoic rocks. The predominant frequencies at these sites depend strongly on the local geology. The average predominant frequencies of the sites on Quaternary sediments are 2.4?Hz, 5.3?Hz on Tertiary, 7.5?Hz on Jurassic, 7.2?Hz on Deccan, 4.6?Hz on Cretaceous and 7.5?Hz on Proterozoic formations. The average site amplification values at predominant frequencies are 3.7 for the sites of Quaternary deposits, 3.3 for Tertiary, 3.3 for Cretaceous rock, 4.2 for Deccan trap, 4.1 for Jurassic sites and 4.6 for Proterozoic. The damage to the houses during 2001 Bhuj earthquake is compared with the amplification at predominant frequencies at those sites. The spatial variation of predominant frequencies and the site amplifications at different frequencies corresponding to the natural frequencies of different storey buildings are studied, which will be useful in the evaluation of seismic hazard in the region.  相似文献   

Lissajous motion near Lagrangian point $$ L_{2} $$ in radial solar sail     

Arun Kumar Yadav  Badam Singh Kushvah  Uday Dolas 《Journal of Astrophysics and Astronomy》2018,39(6):72

An attempt was made to study the dynamics close to the collinear libration point \( L_{2} \) of the radial solar sail circular-restricted three-body problem (RSCRTBP) in the Sun–Jupiter System, where the third massless body is a solar sail. We analyse the qausi-periodic (Lissajous solutions) orbits about the libration point \( L_{2} \). The Lindstedt–Poincaré approximation for the qausi-periodic orbits was used for numerical simulations. We utilized linear quadratic regulator (LQR) to stabilize the full nonlinear model, and linear state-feedback controller was designed to stabilize the trajectory.  相似文献   

Multifractality in seismic sequences of NW Himalaya     

Chamoli  Ashutosh  Yadav  R. B. S. 《Natural Hazards》2013,77(1):19-32

Multifractal behaviour of interevent time sequences is investigated for the earthquake events in the NW Himalaya, which is one of the most seismically active zones of India and experienced moderate to large damaging earthquakes in the past. In the present study, the multifractal detrended fluctuation analysis (MF-DFA) is used to understand the multifractal behaviour of the earthquake data. For this purpose, a complete and homogeneous earthquake catalogue of the period 1965–2013 with a magnitude of completeness M _w 4.3 is used. The analysis revealed the presence of multifractal behaviour and sharp changes near the occurrence of three earthquakes of magnitude (M _w ) greater than 6.6 including the October 2005, Muzaffarabad–Kashmir earthquake. The multifractal spectrum and related parameters are explored to understand the time dynamics and clustering of the events.

  相似文献   

Monitoring spatio-temporal pattern of drought stress using integrated drought index over Bundelkhand region,India   总被引：1，自引：1，他引：0  

N. R. Patel  Kamana Yadav 《Natural Hazards》2015,77(2):663-677

  相似文献   

Synthesis of geological and airborne geophysical data for prognosticating new area for the exploration of lead and zinc in Sindesar Khurd area,Rajpura-Dariba belt,Rajsamand district,Rajasthan     

P. K. Yadav  P. C. Avadich 《Journal of the Geological Society of India》2010,75(5):731-738

In the Rajpura-Dariba belt zinc and lead mineralization was established on the basis of gossan and opinions were given that the deposits are stratiform and syngenetic. During last two decades metamorphism and volcanic processes have been attributed for the generation of exhalative and remobilized lead-zinc ore bodies. Subsequent exploration was based on the concept of successive borehole planning around positive intersections. Areas having surface indications of base metal mineralization and their extensions have been already explored. Recent deep drilling by Hindustan Zinc Limited (HZL) in this area has intersected rich ore lodes, thereby confirming depth ward continuity of ore zones at some places. It indicates possibility of searching hidden deposits by innovative techniques. Therefore, today, there is a challenge before geoscientists to discover new deposits in this area by an exploration technique which should have low risk, consume less time and it should be cost effective.  相似文献   

Instruments of RT-2 experiment onboard CORONAS-PHOTON and their test and evaluation III: Coded Aperture Mask and Fresnel Zone Plates in RT-2/CZT payload     

Anuj Nandi  S. Palit  D. Debnath  Sandip K. Chakrabarti  T. B. Kotoch  R. Sarkar  Vipin K. Yadav  V. Girish  A. R. Rao  D. Bhattacharya 《Experimental Astronomy》2011,29(1-2):55-84

Imaging in hard X-rays of any astrophysical source with high angular resolution is a challenging job. Shadow-casting technique is one of the most viable options for imaging in hard X-rays. We have used two different types of shadow-casters, namely, Coded Aperture Mask (CAM) and Fresnel Zone Plate (FZP) pair and two types of pixellated solid-state detectors, namely, CZT and CMOS in RT-2/CZT payload, the hard X-ray imaging instrument onboard the CORONAS-PHOTON satellite. In this paper, we present the results of simulations with different combinations of coders (CAM & FZP) and detectors that are employed in the RT-2/CZT payload. We discuss the possibility of detecting transient Solar flares with good angular resolution for various combinations. Simulated results are compared with laboratory experiments to verify the consistency of the designed configuration.  相似文献